Software(Firmware) perinstaliavimams Nokia BB5 telefonams

Va. :P Radau labai naudingą tutorialą ir softą, kaip perinstaliuoti. Pats persiinstaliavau ir viskas tikrai veikia. Tikiuosi, daug kam pravers. :P

Viskas originalo kalba, pats nenaudojau Phoenix 2004, o tiesiog nuo 2006 pradėjau. Kodėl? Kuo naujesnė versija, tuo geresnius telefonus ima. Tarkim senesniems telefonų modeliams užtenktų gal ir 2004, tačiau Symbianams reikia 2006. Žinoma yra 2007 versija, tačiau man ji nerado telefeno firmware, tad apsistojau ties 2006. :D

SVARBU!!! Jei telefonas yra sugedęs, turite uždėti varnelę ant "Dead phone flashing" penktąjame žingsnyje. :D

© Expert-GSM & all the team:

zoolcopa/anakronik/bonhomme/exodia/ombre/behemot/zdig1

 

This tutorial explains how to upgrade your Nokia BB5 with the latest firmware. You will need a USB DKU-2 cable and the software “PHOENIX Service” by Nokia! (No dongle to buy!!!)

 

This method proved successful by flashing one Nokia 6680 ORANGE and another one branded SFR, and also on other hundreds of BB5 phones, like 6630 Nokia original firmware version, N70, N90…

 

However, we cannot be hold responsible for the damages you can do by making a wrong handle, and losing your warranty!

 

 

BEFORE BEGINNING!

 

- Save all the data from your phone (on your memory card or on PC)

- Remove your memory card and your SIM card

- Fully charge your phone’s battery

- Uninstall Nokia connectivity cable driver / Nokia connectivity solution from your PC!

- Uninstall Diego and Phoenix if you have them on your PC (think to delete manually from « program files » the files that might persist after the uninstall, and even clean tour registries if you still have problems)

 

What you need :

 

- the following software:

1 - Diego (e.g.: 55667793_Diego_3_06.msi)

2 - Phoenix 2004 + crack (e.g. : phoenix_service_sw_2004_39_7_70.EXE + 1-crack_dongle_phoenix_all_.EXE)

3 - Phoenix 2006 (e.g. : phoenix_service_sw_2006_12_5_136.rar)

 

- the firmware of your phone. (check the file ‘last firmware’ for the latest versions of your bb5 phone at the date of appearance of this tutorial)

 

- the DKU-2 cable and the phone, of course.

 

Some of these files are archived on volumes. Unpack them all in the same folder and you will finally get the file you want. For Phoenix 2004, do “Save as” in order to download it, and change it in “.EXE”.

 

 

Step N° 1 - INSTALL DIEGO

 

- Run and install the following file: 55667793_Diego_3_06.msi

 

- If you get an error during the installation, it’s because you didn’t uninstall the Nokia connectivity cable driver!

 

 

Step N° 2 - INSTALL PHOENIX SERVICE 2004 WITH THE CRACK

 

- Open the crack first. Just open it, don’t run it now!

 

- Start installing phoenix 2004. During the installation you’ll get an error message.

 

- Press on “Retry” and run the crack immediately after! (Check that the destination folder is Windows/system32).

 

If you’re not fast enough, the message will reappear and you’ll have to re-run the crack the same way as above (but faster…)

 

- You’ll get 2 error messages, just press OK, and then Finish.

 

- You successfully installed phoenix service 2004.

 

Restart your PC.

 

 

Step N° 3 - INSTALL PHOENIX 2006

 

You have the shortcut for Phoenix on your desktop. Run it, and you might get several times the message "dskey not found!”. This is normal, just press « ok », and eventually Phoenix should open.

 

- Don’t close the program. You must only minimize the window.

 

- Run phoenix_service_sw_2006_12_5_136.EXE. You shouldn’t have any error!

 

- Make sure you don’t restart the PC at the end of the installation. Just choose "restart my PC later" and then Finish.

 

Now you can close the window of Phoenix that you have minimized.

 

Go to the folder Program files/Nokia/phoenix and copy this entire folder on your desktop.

 

Restart your PC.

 

If you have any error messages after the reboot, just press « Cancel ».

Go to /Program files/Nokia/, delete the folder phoenix, then replace it by the folder that you saved on your desktop. Now Re-run the crack of Phoenix 2004.

 

You can now run Phoenix 2006.

 

 

Step N° 4 – INSTALL THE CABLE

 

It is advisable to close the applications you don’t need during the flashing (like antivirus, anti-spy ware etc).

 

Connect your USB cable (DKU2 or another) to the PC, and connect your started phone.

 

Wait for Windows XP to install all the drivers (it’s better to not have unknown hardware devices), and then don’t touch your phone anymore because the cable doesn’t hang on very well and it might disconnect!

 

Now you have to execute these steps in phoenix:

 

File / Manage connection / New/ select USB / press Finish / Apply and Close.

 

 

Step N° 5 - FLASHING THE PHONE

 

- Put the firmware folder on your desktop. (e.g. RM36 for a Nokia 6680)

It should contain 2 files (this might vary depending on your phone model and download source):

One (MCU) with the .COR extension and the other one (PPM) with the .V30 extension.

 

- Do the following in phoenix: Flashing / sw update

You should see the name of the firmware folder (like RM36) on the top of the phoenix window. If you can see it, you’re on the good way.

 

- On the first line (Image File), browse for your file that ends by .COR .

 

- On the second line (PPM File), browse for your file that ends by .V30 .

 

Press START and don’t touch your phone anymore.

 

Wait for a message!

Phoenix will tell you to press the ON key of your phone and OK on the Phoenix software!

 

Firmware upgrade was done!

 

 

Notes:

for some phones, you don’t have to install phoenix 2006. The 2005 or 2004 might be enough:

 

Phoenix 2004 --- 6630 . . .

Phoenix 2005 --- N70 . . . 6680 . . . 6630

Phoenix 2006 --- N90 . . . N70 . . . 6680 . . . 6630 . . .

 

You will have the list of the supported models for each version, when you make “File / open product”.

 

The same procedure applies for Phoenix 2005, but you don’t have to re-run the crack (if you have trouble with the phone’s drivers, you can install Nokia_Conn_Cable_Driver_159_ita.msi or even re-install Nokia PC Suite).

 

If you uninstall “Nokia connectivity” at the beginning, you can re-use Nokia PC Suite after that.

 

The reference of the language pack helps you to choose the language you want in your the phone (so you can pick a different version than the .V30).

 

The phones that are locked on an operator will remain so after the flashing. The unlock code provided by your operator will work whether you flash your phone in a Nokia original firmware version or not.

 

The number of FW files is depending on the phone model (6630 has 2 files / 6020 has 3 files / Communicator has 5 files). The ideal would be to have a flash .EXE (data package), allowing to know the order of the files due to the included “.INI”; but there’s not always the case (the minimum is to have one mcu and one ppm).

 

The order in the flashing procedure (see the JPG image)

 

Image file: \products\rh12_28_11005.500 (.3 chiffres)

PPM file: \products\ rh12_28_11005.50c (.2 chiffres + lettre)

Content file: \products\rh12_28_11005.50.ucp_c (.2 chiffres+ mot + lettre)

ADSP Flash : NONE (communicator)

APE Variant : NONE (communicator)

APE Userdisk: NONE (communicator)

 

For dead phones: File/ Open product, choose your phone model and then flash it (see attached PDF). If it doesn’t work, you can still flash your phone with a box, after have been doing a full-erase.

 

 

A big THANK YOU to all the people that contributed to this tutorial and to those that translated it (Fr, Ar, Eng, It, Ger), so that many people can take advantage of it 

 

 

 

 

© Expert-GSM

& all the team:

zoolcopa

anakronik

bonhomme

exodia

ombre

behemot

zdig1

Va nuorodos iš kur gaut programas. :D

Diego_3_09

http://www.divshare.com/download/601478-654

Dongle Crack

http://www.divshare.com/download/601490-082

Phoenix 2006 crack

http://www.divshare.com/download/601520-9d2

Phoenix_service_sw_2006_44_6_163

http://www.divshare.com/download/601658-eb1

Patariu parsisiųsti kuo greičiau, nes gali baigtis galiojimo laikas... :D Jei kils kokių klausimų, klauskit - bandysiu paaiškinti. :D

Firmware turit ieškoti patys. Aš pats radau http://www.x-drivers.com :D Sėkmės :D

Sudariau šiokį tokį sąrašiuką Noka BB5 telefonų. Negaliu garantuoti, kad čia visi BB5 telefonai, tačiau dauguma. :D

Nokia 3110 Classic

Nokia 3250

Nokia 5200

Nokia 5300

Nokia 5500

Nokia 5700

Nokia 6110 Navigator

Nokia 6120 Classic

Nokia 6121 Classic

Nokia 6125

Nokia 6126

Nokia 6131

Nokia 6133

Nokia 6136

Nokia 6151

Nokia 6233

Nokia 6234

Nokia 6267

Nokia 6270

Nokia 6275

Nokia 6280

Nokia 6288

Nokia 6290

Nokia 6300

Nokia 6500 Classic

Nokia 6500 Slide

Nokia 6555

Nokia 6630

Nokia 6638

Nokia 6680

Nokia 6681

Nokia 6682

Nokia 7370

Nokia 7373

Nokia 7390

Nokia 8600

Nokia E50

Nokia E60

Nokia E61

Nokia E61i

Nokia E62

Nokia E65

Nokia E70

Nokia E90 Communicator

Nokia N70

Nokia N71

Nokia N72

Nokia N73

Nokia N75

Nokia N76

Nokia N77

Nokia N80

Nokia N81

Nokia N82

Nokia N85

Nokia N90

Nokia N91

Nokia N92

Nokia N93

Nokia N93i

Nokia N95

Ačiū už dėmesį. :D Gero vakaro. :D

Gal, kas galėtų atnaujinti nuorodas? :D